Build Simple Floating Kitchen Shelves

Author: admin | Categories: Home Shelving comments
Rustic Floating Kitchen Shelves

Floating kitchen shelves – How to Build Simple Floating Shelves. If you’re looking for a place to take pictures, glassware, figurines and to show, these are easy to build floating platforms for you. These boards are “floating shelves” because you are brackets or hardware that keeps them cannot see. The shelves are basically two parts: a strip of wood with nails in a wall and a cut-to-size hollow door.

Getting Ready to build simple floating kitchen shelves, Gather the tools and materials you need. Refer to the “things you must” list below. Decide how many shelves you want, how long you want each shelf to be, and where to put the shelves. Use the stud finder to locate the studs in the wall. Mark them with a pencil or small pieces of masking tape then mark the wall with a pencil line or strip of tape to determine the horizontal position of each shelf.

Making the floating kitchen shelves, cut the door in half lengthwise with a circular saw. Make sure you have a ruler guide clamp to the door so that you cut is straight. For shorter boards, cut half the door to the desired length. Sand any edges that are rough. Measure the width of the hollow space in the door. Attach the cut-to-measure 2 x 4 to the wall with screws directly into the studs. Slide the board on the 2 x 4 to make sure it fits. Spread wood glue on top of the 2 x 4 on the inner wall and the underside of the shelf. Nail the board to the 2 x 4 using small finish nails or brads. Start at the center and working out. Space the nails evenly along the shelf.

Related :  Monitor Shelf for Desk

Comments are closed.