Monitor Shelf For Desk

Author: admin | Categories: Home Shelving comments
Modern  Monitor Shelf For Desk

Adjustable monitor shelf allows you to customize the height of your monitor. Standing as it is beneficial for a computer table without a monitor stand, because it will be offset by different user heights. You can create your own rack rate monitor using PVC pipe and plywood. This basic building materials can be purchased at any hardware store and give you a permanent monitor, which will sit from 8 inches to 14 inches tall.

Measure the space place six inches apart on each PVC pipe and drill a 1/4-inch hole through each pipe with this measurement. The two outer holes will be one inch from the end of the pipe. Stir in 3 1/2 inch pipe into a 4-inch pipe. Align the holes in the pipe and adjust your position with the amount of your choice. Insert the metal pin into the booth to ensure monitor shelf booth at this rate. Glue the 4-inch tube holder and glue the pipe 3 1/2 inch wall mount 3 1/2 inches. Let the glue dry according to the instructions on the packaging.

Place each bracket on the plywood so that the holes in the right angles for each pair of parallel edges. Center the brackets using the Metro. The distance from the bottom of the bracket is at the same distance from the edge of the plywood around each bracket. Screw the bracket of the plywood in place monitor shelf. Plywood with 4-inch bracket was adjusted the monitor stand.

Related :  Spectacular Kitchen Shelving Units

Comments are closed.