Pinch pleat curtains – Loss of tops make hanging curtains on a regular or decorative rod easy. The flaps are clear, flat tubes of fabric sewn as a series of evenly spaced bands on the top edge of the curtain panel, with each strip making a loop. Usually about 2 inches wide, the weave strips match or harmonize with curtain fabrics. Both band ends either sew to the curtain up to make a loop, one end of the strip is folded to the front and secured with a decorative fastener, or both strap ends sewn on the back of the curtain panel – the method used to pinch pleat curtains. On the back of the curtains, the fabric tabs are not visible from the front of the panel.
Pinch Pleat Tab Curtains
Slide the rod through the loops created by the sewn down tabs on the back of each pinch pleat curtains panel; Then simply hang the rod and adjust the curtain for the fullness you want. You can also use nip grip rings, place the rings along the top edge of the curtains and push the rod through them. Attach each ring over a tab area for stronger support. This also makes the curtains to draw in soft folds between the rings.
12 Pinch Pleat Curtains Ideas Photos